Custom Dad Hat in Pressed Wool Felt with Elastic Sweatband for Childrenswear and Schoolwear

Custom Dad Hat — Pressed Wool Felt with Elastic Sweatband

We supply dad hat to brands, retailers, uniform and promotional programmes, made in Pressed Wool Felt with elastic sweatband for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is embroidery density on washed cotton, which puckers if it is wrong — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Rubber Coating — available on Pressed Wool Felt, quoted per position and per colour.
• Structured Front Panel — available on Pressed Wool Felt, quoted per position and per colour.
• Pantone Colour Matching — available on Pressed Wool Felt, quoted per position and per colour.
• Soft Enamel Fill — available on Pressed Wool Felt, quoted per position and per colour.
• Placement Print — available on Pressed Wool Felt, quoted per position and per colour.
• Overlocked Edge — available on Pressed Wool Felt, quoted per position and per colour.
• Wire Brim — available on Pressed Wool Felt, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Pressed Wool Felt
3. Shape sample with elastic sweatband applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same embroidery density on washed cotton.

FAQ

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your dad hat programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.