Custom Straw Hat in Polyester Mesh with Elastic Sweatband for Outerwear and Jacket Programmes

Custom Straw Hat — Polyester Mesh with Elastic Sweatband

We supply straw hat to brands, retailers, uniform and promotional programmes, made in Polyester Mesh with elastic sweatband for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is foldability without cracking the braid — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Edge Binding — available on Polyester Mesh, quoted per position and per colour.
• Metal Buckle Strap — available on Polyester Mesh, quoted per position and per colour.
• Wire Brim — available on Polyester Mesh, quoted per position and per colour.
• Rope Trim — available on Polyester Mesh, quoted per position and per colour.
• Moisture-Wicking Finish — available on Polyester Mesh, quoted per position and per colour.
• Woven Jacquard — available on Polyester Mesh, quoted per position and per colour.
• Steam Blocking — available on Polyester Mesh, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polyester Mesh
3. Shape sample with elastic sweatband applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same foldability without cracking the braid.

FAQ

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

How long does sampling take?

A first sample takes 10 working days, and each revision about 3 days.

Which compliance documents do you provide?

We prepare GRS recycled content claim and the supporting test reports for the destination market.

Start your straw hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.