Custom Ivy Cap in Reflective Fabric with 3D Puff Embroidery for Uniform and Corporate Programmes

Custom Ivy Cap — Reflective Fabric with 3D Puff Embroidery

We supply ivy cap to brands, retailers, uniform and promotional programmes, made in Reflective Fabric with 3d puff embroidery for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is pattern matching across panels on checked cloth — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Anti-Rust Treatment — available on Reflective Fabric, quoted per position and per colour.
• Rib Knit — available on Reflective Fabric, quoted per position and per colour.
• Embroidery — available on Reflective Fabric, quoted per position and per colour.
• Heat-Cut Edge — available on Reflective Fabric, quoted per position and per colour.
• Rubber Coating — available on Reflective Fabric, quoted per position and per colour.
• Hand Braiding — available on Reflective Fabric, quoted per position and per colour.
• Soft Enamel Fill — available on Reflective Fabric, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Reflective Fabric
3. Shape sample with 3d puff embroidery applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pattern matching across panels on checked cloth.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

How long does sampling take?

A first sample takes 7 working days, and each revision about 5 days.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your ivy cap programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.