Custom Trucker Hat — Polyester Mesh with Sewn Edge
We supply trucker hat to brands, retailers, uniform and promotional programmes, made in Polyester Mesh with sewn edge for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is crown height consistency across the run — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Trucker Hat |
|---|---|
| Panels | foam front |
| Back | patterned mesh back |
| Material | Polyester Mesh |
| Construction / finish | Sewn Edge |
| Colour options | 24 shades, Pantone matched |
| Packing | bulk carton |
| MOQ | 2000 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | GSO conformity with Arabic labelling; CPSIA lead and phthalate testing |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Quilted Lining — available on Polyester Mesh, quoted per position and per colour.
- Water-Repellent Finish — available on Polyester Mesh, quoted per position and per colour.
- Beaded Detail — available on Polyester Mesh, quoted per position and per colour.
- Edge Binding — available on Polyester Mesh, quoted per position and per colour.
- Flat Embroidery — available on Polyester Mesh, quoted per position and per colour.
- Rope Trim — available on Polyester Mesh, quoted per position and per colour.
- Debossing — available on Polyester Mesh, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Polyester Mesh
- Shape sample with sewn edge applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same crown height consistency across the run.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Which compliance documents do you provide?
We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.
Start your trucker hat programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
