Custom Camp Cap in Foam Front Panel with Sublimation Printing for E-commerce and Small-Batch Brands

Custom Camp Cap — Foam Front Panel with Sublimation Printing

We supply camp cap to brands, retailers, uniform and promotional programmes, made in Foam Front Panel with sublimation printing for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is fabric weight against breathability in summer use — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Heat Transfer Printing — available on Foam Front Panel, quoted per position and per colour.
• Die-Casting — available on Foam Front Panel, quoted per position and per colour.
• Offset Printing — available on Foam Front Panel, quoted per position and per colour.
• Reflective Piping — available on Foam Front Panel, quoted per position and per colour.
• 3D Puff Embroidery — available on Foam Front Panel, quoted per position and per colour.
• Overlocked Edge — available on Foam Front Panel, quoted per position and per colour.
• Sequin Stitching — available on Foam Front Panel, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Foam Front Panel
3. Shape sample with sublimation printing applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same fabric weight against breathability in summer use.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

How long does sampling take?

A first sample takes 12 working days, and each revision about 3 days.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Start your camp cap programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.