Custom Clothing Accessories in Power Mesh with Custom Drawcord for Wholesale Distributors

Custom Clothing Accessories — Power Mesh with Custom Drawcord

We build clothing accessories programmes from a tech pack or a physical reference sample. This Power Mesh version is developed for brands that need a repeatable specification: the same cloth, the same hand feel and the same fit on every reorder. Fabric, trims, custom drawcord and packaging are all specifiable, so the garment stays consistent across seasons and across production runs.

Most buyers come to us after one of these problems: no reliable way to track a order once it enters production, or no reliable way to track a order once it enters production. Our response is to fix the specification first — fabric weight, shrinkage allowance, stitch density and tolerance — before a single bulk metre is cut.

Specification

What you can customise

• Satin Printed Label — available on Power Mesh, quoted per position and per colour.
• Piece Dyeing — available on Power Mesh, quoted per position and per colour.
• Embossing — available on Power Mesh, quoted per position and per colour.
• Laser Engraving — available on Power Mesh, quoted per position and per colour.
• Custom Drawcord — available on Power Mesh, quoted per position and per colour.
• Piping and Binding — available on Power Mesh, quoted per position and per colour.
• Yarn Dyeing — available on Power Mesh, quoted per position and per colour.

How we produce it

1. Tech pack review and fabric confirmation
2. Lab dips or print strike-off for approval
3. Pattern making, grading and a Power Mesh-spec prototype
4. Fit sample and wearer test, then a pre-production sample
5. Bulk cutting with custom drawcord applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing

Typical applications

• Hospitality and Hotels — clothing accessories uniforms, staff wear or resale programmes
• Spas and Salons — clothing accessories uniforms, staff wear or resale programmes
• Military and Tactical — clothing accessories uniforms, staff wear or resale programmes
• Healthcare and Hospitals — clothing accessories uniforms, staff wear or resale programmes
• Aviation and Airlines — clothing accessories uniforms, staff wear or resale programmes

Quality control

Every bulk order is checked against the approved sample for shade, hand feel, measurements and workmanship. We record shrinkage, colour fastness and seam strength on the first bulk lot and hold the data as the reference for reorders, so clothing accessories batches stay comparable over time. Inspection photos and the measurement report are sent before the balance payment is due.

FAQ

Can you match a specific colour?

Yes. Send us a Pantone TCX reference or a physical swatch. We return lab dips for approval and hold bulk shade within the agreed tolerance band before cutting.

How long does sampling take?

A first prototype is typically ready in 12 working days after the tech pack is confirmed, including fabric sourcing if the base cloth is not in our stock library. Revisions add about 5 days each.

What is the minimum order quantity?

Standard programmes start at 50 pieces per style and colour. We can split sizes across a size set, and for first orders we often accept a mixed-colour run to help you test the market.

Do you provide compliance documents?

We can arrange OEKO-TEX, GOTS, BSCI, WRAP and ISO documentation as well as third-party testing reports for BSCI, and we support REACH, CPSIA and Prop 65 declarations for the relevant markets.

Start your clothing accessories programme

Book a 20-minute call with our merchandising team and get a written quotation within 48 hours.