Custom Thermal Face Mask in Polypropylene (PP) with Steam Blocking for Denim and Workwear Programmes

Custom Thermal Face Mask — Polypropylene (PP) with Steam Blocking

We supply thermal face mask to brands, retailers, uniform and promotional programmes, made in Polypropylene (PP) with steam blocking for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is moisture handling at the nose, where condensation collects first — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Epoxy Dome — available on Polypropylene (PP), quoted per position and per colour.
• Hard Enamel Fill — available on Polypropylene (PP), quoted per position and per colour.
• Injection Moulding — available on Polypropylene (PP), quoted per position and per colour.
• Sequin Stitching — available on Polypropylene (PP), quoted per position and per colour.
• Straw Weaving — available on Polypropylene (PP), quoted per position and per colour.
• Knitted Structure — available on Polypropylene (PP), quoted per position and per colour.
• Embroidery — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polypropylene (PP)
3. Shape sample with steam blocking applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same moisture handling at the nose.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your thermal face mask programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.