Custom Baseball Cap — Neoprene with Overlocked Edge
We supply baseball cap to brands, retailers, uniform and promotional programmes, made in Neoprene with overlocked edge for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is embroidery placement tolerance, because a logo off-centre is rejected on arrival — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Baseball Cap |
|---|---|
| Panels | 7-panel |
| Closure | fitted elastic |
| Material | Neoprene |
| Construction / finish | Overlocked Edge |
| Colour options | 16 shades, Pantone matched |
| Packing | bulk carton |
| MOQ | 1000 pieces per style |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 15-55 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; CPSIA lead and phthalate testing |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Braided Weave — available on Neoprene, quoted per position and per colour.
- Yarn Dyeing — available on Neoprene, quoted per position and per colour.
- Offset Printing — available on Neoprene, quoted per position and per colour.
- Fleece Lining — available on Neoprene, quoted per position and per colour.
- Rubber Coating — available on Neoprene, quoted per position and per colour.
- Knitted Structure — available on Neoprene, quoted per position and per colour.
- Water-Repellent Finish — available on Neoprene, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Neoprene
- Shape sample with overlocked edge applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same embroidery placement tolerance.
FAQ
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your baseball cap programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
