Custom Baseball Cap — Neoprene with Piece Dyeing
We supply baseball cap to brands, retailers, uniform and promotional programmes, made in Neoprene with piece dyeing for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is embroidery placement tolerance, because a logo off-centre is rejected on arrival — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Baseball Cap |
|---|---|
| Panels | 6-panel |
| Closure | fitted elastic |
| Material | Neoprene |
| Construction / finish | Piece Dyeing |
| Colour options | 12 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 2000 pieces per style |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; salt spray test for metal finishes |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Paint Spray — available on Neoprene, quoted per position and per colour.
- Embroidered Patch — available on Neoprene, quoted per position and per colour.
- UV Printing — available on Neoprene, quoted per position and per colour.
- Beaded Detail — available on Neoprene, quoted per position and per colour.
- Rope Trim — available on Neoprene, quoted per position and per colour.
- Crochet — available on Neoprene, quoted per position and per colour.
- Edge Binding — available on Neoprene, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Neoprene
- Shape sample with piece dyeing applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same embroidery placement tolerance.
FAQ
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your baseball cap programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
