Custom Bucket Hat — Sherpa Fleece with Rhinestone Setting
We supply bucket hat to brands, retailers, uniform and promotional programmes, made in Sherpa Fleece with rhinestone setting for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is brim stiffness, because a limp brim loses the whole silhouette — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.
The failures here are predictable: shade variation within one carton, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Bucket Hat |
|---|---|
| Brim | 7 cm brim |
| Type | packable bucket hat |
| Material | Sherpa Fleece |
| Construction / finish | Rhinestone Setting |
| Colour options | 6 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 300 pieces per style |
| Sampling | 7 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; salt spray test for metal finishes |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Pigment Dye — available on Sherpa Fleece, quoted per position and per colour.
- Waffle Knit — available on Sherpa Fleece, quoted per position and per colour.
- Heat-Cut Edge — available on Sherpa Fleece, quoted per position and per colour.
- Elastic Sweatband — available on Sherpa Fleece, quoted per position and per colour.
- Hot Foil Stamping — available on Sherpa Fleece, quoted per position and per colour.
- Sublimation Printing — available on Sherpa Fleece, quoted per position and per colour.
- Mercerised Finish — available on Sherpa Fleece, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Sherpa Fleece
- Shape sample with rhinestone setting applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same brim stiffness.
FAQ
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 7 working days, and each revision about 5 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your bucket hat programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
