Custom Thermal Face Mask — Silicone with Pleating
We supply thermal face mask to brands, retailers, uniform and promotional programmes, made in Silicone with pleating for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is seal at the nose bridge without pressure marks — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Thermal Face Mask |
|---|---|
| Size | kids size |
| Type | windproof face mask |
| Material | Silicone |
| Construction / finish | Pleating |
| Colour options | 12 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 1000 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; EN 71 part 3 for decorative components |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Quilted Lining — available on Silicone, quoted per position and per colour.
- Leather Patch — available on Silicone, quoted per position and per colour.
- Felt Blocking — available on Silicone, quoted per position and per colour.
- Edge Binding — available on Silicone, quoted per position and per colour.
- Packable Crushable Finish — available on Silicone, quoted per position and per colour.
- Steam Blocking — available on Silicone, quoted per position and per colour.
- Die-Casting — available on Silicone, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Silicone
- Shape sample with pleating applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seal at the nose bridge without pressure marks.
FAQ
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
Start your thermal face mask programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
